PRESSURE WASHER TROUBLE SHOOTER
       Tech Tips and Troubleshooting
 

       Listed below is the problem you selected with causes, solutions and discussion

WATER SPRAYING AT TIP

Replace the coupler 

O Ring 

This can happen at the connection between the wand and nozzle, gun and hose and between the hose and pressure washer. 

 Most often the problem is the o-ring in the coupler side of the standard quick connector or the nipple side of the M22 screw type quick connector.  These o-rings quite often get blown out of the connector when water is pushed thorough without the other side of the nozzle being connected, either on a gun or nozzle.

They can also simply wear out.  They are easy to replace but you may need a pick tool to pull the old o-ring out.  

Click here for more discussion on various couplers.   

To purchase new nozzles and see what's available click here 

 SOME OF THESE OPERATIONS CAN BE EXTREMELY DANGEROUS.  IF YOU DO NOT HAVE SUFFICIENT TRAINING IN THESE PROCEDURES, WE RECOMMEND YOU SEEK ASSISTANCE FROM A 
QUALIFIED TECHNICIAN



CONTACT US

OUR LINKS

If you want to know more about how a pressure washer works click here.
  www.all-you-want-to-know.com



Do you need a HOT WATER Pressure Washer?  Click here to see our
 Dynablast Hot Water Machines.

Having trouble with your machine?  Quite often it's a quick and easy fix. 
Click for  trouble shooting guide

Hydraclean Hydraulic Powered
Pressure Washers

Pressure washing equipment,
accessory and parts

Copyright 2013  NA Powerclean System Sales Inc. All rights reserved.  No part of the information herein to be reproduced without express written permission