Fix or replace broken or disconnected
bearings or connecting rods |
If 1 or 2 plungers are not moving the water,
pressure will vary and the hose will vibrate.
The vibrating hose could be a valve
problem but If there is a
problem in
the crankcase it will be quite obvious, as well as serious.
Inspect the
connecting rods and bearings for damage. This is generally a fatal fault
requiring a new pump.
SOME OF THESE OPERATIONS CAN BE
EXTREMELY DANGEROUS. IF YOU DO NOT HAVE SUFFICIENT TRAINING IN THESE PROCEDURES, WE RECOMMEND YOU
SEEK ASSISTANCE FROM A
QUALIFIED
TECHNICIAN
|