PRESSURE WASHER TROUBLE SHOOTER
       Tech Tips and Troubleshooting
 

       Listed below is the problem you selected with causes, solutions and discussion

PLUGGED ORIFICE IN BODY

Remove and clean or soak in warm water

Soap injectors have a small orifice inside that creates the suction picks picks up the soap from the soap hose.  

There is a small spring and ball inside as well.  

Sometimes the orifice can get plugged or the ball and spring gets  fouled with debris. This will stop the venturi action, which is the principle that picks up the soap.  

Make sure the insides of the injector are clean and that there is a filter at the end of the pickup hose.

 SOME OF THESE OPERATIONS CAN BE EXTREMELY DANGEROUS.  IF YOU DO NOT HAVE SUFFICIENT TRAINING IN THESE PROCEDURES, WE RECOMMEND YOU SEEK ASSISTANCE FROM A 
QUALIFIED TECHNICIAN



CONTACT US

OUR LINKS

If you want to know more about how a pressure washer works click here.
  www.all-you-want-to-know.com



Do you need a HOT WATER Pressure Washer?  Click here to see our
 Dynablast Hot Water Machines.

Having trouble with your machine?  Quite often it's a quick and easy fix. 
Click for  trouble shooting guide

Hydraclean Hydraulic Powered
Pressure Washers

Pressure washing equipment,
accessory and parts

Copyright 2013  NA Powerclean System Sales Inc. All rights reserved.  No part of the information herein to be reproduced without express written permission