Most soap
injectors have a metering valve to adjust the quantity of soap being injected
into the system. This valve is usually located where the soap enters the
injector at the pick-up tube. Turn clockwise to increase
soap pickup, counterclockwise to decrease the flow. Some
injectors only specify a minimum flow required to activate the
soap. Other
injectors are more specific as to the flow rate that activates the
soap flow. Check
here to see all types of soap injectors available. Click
here for more discussion on soap injectors All
injectors adjust soap flow in much the same way.
SOME OF THESE OPERATIONS CAN BE
EXTREMELY DANGEROUS. IF YOU DO NOT HAVE SUFFICIENT TRAINING IN THESE PROCEDURES, WE RECOMMEND YOU
SEEK ASSISTANCE FROM A
QUALIFIED
TECHNICIAN
|